Bisagra de ducha ajustable hacia arriba y hacia abajo-3951-02
Raise Up-Down Adjustable Shower Hinge (Z-3951-02) is a shower door hinge for frameless shower doors, made for 6 mm (1/4″), 8 mm (5/16″) tempered glass, built from solid forged brass.
| Utilizar vidrio templado monolítico para grosores de vidrio | |||
| 1/2″ (12 mm) | 3/8″ (10 mm) | 5/16″ (8 mm) | 1/4″ (6 mm) |
| √ | √ | ||
Diseñado para vidrio de 1/4″(6 mm) y 5/16″(8 mm)
Construcción maciza de latón forjado
Disponible a la izquierda y a la derecha
Raise Up-Down Adjustable Shower Hinge (Z-3951-02) is a adjustable frameless shower door hinge. It is engineered for 6 mm (1/4″), 8 mm (5/16″) monolithic tempered glass. The body is machined from solid forged brass. For the wider selection context, see Zimmor’s shower door hinge guide.
Características principales
- Compatibilidad de cristal: Fits 6 mm (1/4″), 8 mm (5/16″) monolithic tempered glass
- Material: solid forged brass construction
- Adjustable: door alignment can be corrected after installation
Aplicaciones
- Frameless pivot shower doors in residential bathrooms
- Hotel and gym wet rooms where doors take daily, heavy use
- Wall-to-glass openings in walk-in showers
- Renovation projects replacing framed doors with frameless glass
- Custom enclosures spec’d by architects and glazing contractors
Más en esta serie: Bisagra angular ajustable de esquina cuadrada plana para vidrio a vidrio de 90°-7441 · Bisagra ajustable cuadrada plana para vidrio a vidrio de 135°-7431
Notas de instalación
- Mount the hinge bodies on the wall/panel line, keeping both cups level.
- Hang the tempered glass door and secure the glass cups with the set screws – evenly, not over-torqued.
- Open the door slowly: the mechanism should raise the glass gently as it swings, so the bottom edge clears the floor or sweep.
- Adjust spring tension so the door lowers back without slamming.
- Professional installation recommended for frameless glass doors.
Preguntas frecuentes
¿Con qué grosor de vidrio es compatible el Z-3951-02?
The Z-3951-02 is rated for 6 mm (1/4″), 8 mm (5/16″) monolithic tempered glass. Always use tempered (safety) glass – never annealed glass.
What is the Z-3951-02 made of?
The Z-3951-02’s hinge body is made of solid forged brass. Brass bodies take Zimmor’s full finish program, including PVD coatings for humid bathrooms.
Can the door position be corrected once fitted?
Yes – loosen the adjustment screws, level the door against the fixed panel, and re-tighten. Do the check with the door closed so the gap line reads true.
Does the finish need maintenance in a wet bathroom?
Wipe the fittings down after heavy use and avoid abrasive cleaners. PVD finishes hold up best against constant humidity and limescale.
What is the MOQ and lead time for this series?
MOQ and lead time vary by finish and quantity. Send the model list to Zimmor sales and you will receive a quotation with the current production timing.