Z-9013 Dobrinha de box de Vidro Paredão Canto Chanfrado de Alta Resistência – Placa Traseira Deslocada

Projetado para 3/8″(10mm) e 1/2″(12mm) Vidro
Construção Sólida de Latão Forjado
Molas de Retorno Duplas de Aço Inoxidável Enroladas com Precisão
Parafusos de Aba Fixa em Aço Inoxidável Estilo Alan
(Allen soquete Incluído) e parafusos Phillips
Fechamento Automático a partir de 15 Graus

Para orientação de seleção mais abrangente, veja nossos guia completo de especificação de ferragens para boxes e guia de revestimento PVD.

Z-9013 Heavy Duty Beveled Edge Wall-to-Glass Shower Hinge – Offset Back Plate (Z-9013) is a heavy duty frameless shower door hinge for wall-to-glass installation at a 90° panel angle. It is engineered for 10 mm (3/8″), 12 mm (1/2″) monolithic tempered glass. The body is machined from solid forged brass, with stainless return springs and self-closing action from 15°. It is available in Zimmor’s full finish program (PVD included) to match the rest of the enclosure hardware. For the wider selection context, see Zimmor’s shower door hinge guide.

Principais Características

• Compatibilidade do vidro: Fits 10 mm (3/8″), 12 mm (1/2″) monolithic tempered glass
• Material: solid forged brass construction with precision-wound stainless return springs
• Self-closing: spring returns the door from 15° of opening
• Geometria: built for 90° panel angles with a beveled-edge profile
• Rated class: heavy duty build for heavier leaves
• Finishes: full Zimmor finish program available, PVD included

Aplicações

• Frameless pivot shower doors in residential bathrooms
• Hotel and gym wet rooms where doors take daily, heavy use
• Wall-to-glass openings in walk-in showers
• Renovation projects replacing framed doors with frameless glass
• Custom enclosures spec’d by architects and glazing contractors

Mais nesta série: Z-9011 Dobrá para Ducha de Parede a Vidro com Borda chanfrada – Full Back Plate · Dobradiça de box com Borda chanfrada Heavy Duty-9012

Notas de Instalação

1. Confirm the door and panel are monolithic (tempered) safety glass and within 10 mm (3/8″), 12 mm (1/2″) range.
2. Choose the back-plate option to suit the layout – full back plate spans the hinge, offset back plate clears a tile line.
3. Mark hole positions on a plumb, solid substrate; drill and secure the wall plate with appropriate anchors.
4. Clamp the glass cup onto the door and close it; use the adjustment screws to level the gaps before final tightening.
5. Cycle the door through the full arc and check self-close action. Tile over drywall needs backing or through-bolts – professional installation recommended.

Perguntas Frequentes

Que espessura de vidro o Z-9013 se encaixa?

The Z-9013 is rated for 10 mm (3/8″), 12 mm (1/2″) monolithic tempered glass. Always use tempered (safety) glass – never annealed glass.

What is the Z-9013 made of?

The Z-9013’s hinge body is made of solid forged brass, with stainless steel return springs inside. Brass bodies take Zimmor’s full finish program, including PVD coatings for humid bathrooms.

Is the Z-9013 self-closing?

Sim. Uma mola dentro da dobradiça começa a fechar a porta a partir de aproximadamente 15° de abertura, então a porta retorna à linha de vedação por conta própria.

Wall mount or glass mount – how does the Z-9013 attach?

The Z-9013 is a wall-to-glass hinge: the back plate anchors to a solid wall, the cup clamps the glass. Use the full or offset back-plate option according to the tile line.

Can this hinge be retrofitted to an existing enclosure?

Yes, if the drilled hole pattern on the existing door matches the hinge cup spacing. Measure before ordering – tempered panels cannot be re-drilled after the fact.