Поворотная душевая петля усиленного класса с регулировкой, со скошенным краем-AD381238-40

Предназначен для закалённого безопасного стекла 3/8″(10 мм) и 1/2″(12 мм)

Для более широкого выбора, смотрите наш полное руководство по спецификации сантехнического оборудования для душевых и руководства по PVD-покрытию.

Adjustable Heavy Duty Beveled Edge Pivot Shower Hinge (Z-AD381238-40) is a heavy duty adjustable frameless shower door hinge. It is engineered for 10 mm (3/8″), 12 mm (1/2″) monolithic tempered glass. It is available in Zimmor’s full finish program (PVD included) to match the rest of the enclosure hardware. For the wider selection context, see Zimmor’s shower door hinge guide.

Ключевые особенности

• Совместимость со стеклом: Fits 10 mm (3/8″), 12 mm (1/2″) monolithic tempered glass
• Adjustable: door alignment can be corrected after installation
• Rated class: heavy duty build for heavier leaves
• Finishes: full Zimmor finish program available, PVD included

Применение

• Frameless pivot shower doors in residential bathrooms
• Hotel and gym wet rooms where doors take daily, heavy use
• Wall-to-glass openings in walk-in showers
• Renovation projects replacing framed doors with frameless glass
• Custom enclosures spec’d by architects and glazing contractors

Больше в этой серии: Поворотная душевая петля усиленного класса с регулировкой, со скошенным краем-AD381138-40 · Петля поворотная усиленная-3838

Заметки по установке

1. Confirm the door is monolithic tempered glass within 10 mm (3/8″), 12 mm (1/2″).
2. Mount the pivot hinge to the wall (or floor-side pivot, per the drawing) into a solid, plumb substrate.
3. Drop the door onto the pivot spindle and set the vertical with the adjustment screws.
4. Swing the door through the full arc and set closing tension so the door settles at the seal line.
5. Tile over hollow drywall needs backing plates – the hinge carries the full door weight. Professional installation recommended.

Часто задаваемые вопросы

Для какой толщины стекла подходит Z-AD381238-40?

The Z-AD381238-40 is rated for 10 mm (3/8″), 12 mm (1/2″) monolithic tempered glass. Always use tempered (safety) glass – never annealed glass.

How is the door adjusted after installation?

Hinges in this series include adjustment screws: close the door, check the vertical gaps, and correct the door position with the adjustment screws before final tightening.

Can this hinge be retrofitted to an existing enclosure?

Yes, if the drilled hole pattern on the existing door matches the hinge cup spacing. Measure before ordering – tempered panels cannot be re-drilled after the fact.

How do I get a quotation?

Email the model number, glass thickness and quantity to Zimmor sales. The quotation covers finish options, packing and delivery terms.