Tirador de Puerta de doble cara-5112
Back to Back Door Knob (Z-5112) is a shower door handle & knob series for frameless glass shower doors, made for 10 mm (3/8″), 12 mm (1/2″) tempered glass, built from brass.
| Utilizar vidrio templado monolítico para grosores de vidrio | |||
| 1/2″ (12 mm) | 3/8″ (10 mm) | 5/16″ (8 mm) | 1/4″ (6 mm) |
| √ | √ | ||
Construcción sólida de latón a través de vidrio
Disponble para montaje a ambos lados y lado único
Diseñado para vidrio de 3/16″ – 1/2″
Requiere diámetro de 3/8″ (8mm) a 1/2″ (12mm)
Orificio para instalación
Para una orientación más amplia sobre la selección, consulte nuestra guía completa de especificación de herrajes para duchas y guía de recubrimiento PVD.
Back to Back Door Knob (Z-5112) is a door knob for frameless glass shower doors. It is a back-to-back fitting: one bolt set clamps both sides of the door at the same time. It mounts on 10 mm (3/8″), 12 mm (1/2″) tempered glass with through-glass fixings. For the wider selection context, see Zimmor’s shower handle & knob guide.
Características principales
- Compatibilidad de cristal: Mounts on 10 mm (3/8″), 12 mm (1/2″) monolithic tempered glass
- Material: brass construction
- Back-to-back mounting: single bolt set clamps both glass faces
Aplicaciones
- Pull handles for pivot and hinged frameless shower doors
- Grips for sliding shower door leaves
- Back-to-back pull pairs on frameless glass doors
- Hotel and apartment bathroom programs specified in bulk
- Office glass partition doors
Más en esta serie: Tirador de Puerta de Ducha de Vidrio de doble cara-5122 · Tirador de Puerta de Ducha de Vidrio de doble cara-5132
Notas de instalación
- Drill the through-holes in the glass panel to the handle’s hole pattern before tempering – do not drill tempered glass.
- Insert the mounting bolts through the glass and thread them into both handle halves.
- Tighten both sides alternately so the knob stays centered on the hole pair.
- Check the grip is solid with no racking between the two halves.
- Re-torque after the first week of use if needed.
Preguntas frecuentes
¿En qué grosor de vidrio se monta el Z-5112?
Se monta en vidrio templado de 10 mm (3/8″), 12 mm (1/2″). Los orificios a través del vidrio se perforan antes del templado, por lo que confirme el grosor y el patrón de orificios con su fabricante con anticipación.
¿De qué está hecho el Z-5112?
The Z-5112 is built from brass. Solid metal construction matters on glass hardware – thin stamped parts creep loose under door loads.
What does back-to-back mean on shower door handles?
A back-to-back handle is one assembly: a tube passes through the glass and bolts clamp both sides, so you get a pull outside and a matching grip inside from a single fixing set.
Does the handle need maintenance?
Retighten the set screws after the first week of use and wipe dry after showers. Plated brass tube holds its finish well; avoid abrasive creams.
Where do Zimmor products ship from?
Production is based in Foshan, Guangdong, China, and Zimmor serves customers worldwide – freight terms and consolidation are confirmed on the quotation.
