Tirador de Puerta de Ducha de Vidrio de doble cara-5122
Back To Back Glass Shower Door Knob (Z-5122) is a shower door handle & knob series for frameless glass shower doors, made for 10 mm (3/8″), 12 mm (1/2″) tempered glass, built from brass.
| Utilizar vidrio templado monolítico para grosores de vidrio | |||
| 1/2″ (12 mm) | 3/8″ (10 mm) | 5/16″ (8 mm) | 1/4″ (6 mm) |
| √ | √ | ||
Construcción sólida de latón a través de vidrio
Disponble para montaje a ambos lados y lado único
Diseñado para vidrio de 3/16″ – 1/2″
Requiere diámetro de 3/8″ (8mm) a 1/2″ (12mm)
Orificio para instalación
Para una orientación más amplia sobre la selección, consulte nuestra guía completa de especificación de herrajes para duchas y guía de recubrimiento PVD.
Back To Back Glass Shower Door Knob (Z-5122) is a door knob for frameless glass shower doors. It is a back-to-back fitting: one bolt set clamps both sides of the door at the same time. It mounts on 10 mm (3/8″), 12 mm (1/2″) tempered glass with through-glass fixings. For the wider selection context, see Zimmor’s shower handle & knob guide.
Características principales
- Compatibilidad de cristal: Mounts on 10 mm (3/8″), 12 mm (1/2″) monolithic tempered glass
- Material: brass construction
- Back-to-back mounting: single bolt set clamps both glass faces
Aplicaciones
- Pull handles for pivot and hinged frameless shower doors
- Grips for sliding shower door leaves
- Back-to-back pull pairs on frameless glass doors
- Hotel and apartment bathroom programs specified in bulk
- Office glass partition doors
Más en esta serie: Pom para Puerta de Ducha de Vidrio de doble cara-5119 · Tirador de Puerta de doble cara-5112
Notas de instalación
- Drill the through-holes in the glass panel to the handle’s hole pattern before tempering – do not drill tempered glass.
- Insert the mounting bolts through the glass and thread them into both handle halves.
- Tighten both sides alternately so the knob stays centered on the hole pair.
- Check the grip is solid with no racking between the two halves.
- Re-torque after the first week of use if needed.
Preguntas frecuentes
What glass thickness does the Z-5122 mount on?
It mounts on 10 mm (3/8″), 12 mm (1/2″) tempered glass. The through-glass holes are drilled before tempering, so confirm thickness and hole pattern with your fabricator early.
What is the Z-5122 made of?
The Z-5122 is built from brass. Solid metal construction matters on glass hardware – thin stamped parts creep loose under door loads.
What does back-to-back mean on shower door handles?
A back-to-back handle is one assembly: a tube passes through the glass and bolts clamp both sides, so you get a pull outside and a matching grip inside from a single fixing set.
Does the handle need maintenance?
Retighten the set screws after the first week of use and wipe dry after showers. Plated brass tube holds its finish well; avoid abrasive creams.
What is the MOQ and lead time for this series?
MOQ and lead time vary by finish and quantity. Send the model list to Zimmor sales and you will receive a quotation with the current production timing.
