Bisagra pivote cuadrada-3820

Diseñado para vidrio de 5/16″(8mm) y 3/8″(10mm)
Construcción maciza de latón forjado
Resortes de retorno duales de acero inoxidable enrollados con precisión
Tornillos de abrazadera estilo Alan de acero inoxidable
(incluye llave Allen) y tornillos Phillips
Cierre automático desde 25 grados

Para una orientación más amplia sobre la selección, consulte nuestra guía completa de especificación de herrajes para duchas y guía de recubrimiento PVD.

Standard Duty Square Corner Pivot Shower Hinge (Z-3820) is a standard duty frameless shower door hinge. It is engineered for 8 mm (5/16″), 10 mm (3/8″) monolithic tempered glass. The body is machined from solid forged brass, with stainless return springs and self-closing action from 15°. It is available in Zimmor’s full finish program (PVD included) to match the rest of the enclosure hardware. For the wider selection context, see Zimmor’s shower door hinge guide.

Características principales

• Compatibilidad de cristal: Fits 8 mm (5/16″), 10 mm (3/8″) monolithic tempered glass
• Material: solid forged brass construction with precision-wound stainless return springs
• Self-closing: spring returns the door from 15° of opening
• Rated class: standard duty build for heavier leaves
• Finishes: full Zimmor finish program available, PVD included

Aplicaciones

• Frameless pivot shower doors in residential bathrooms
• Hotel and gym wet rooms where doors take daily, heavy use
• Wall-to-glass openings in walk-in showers
• Renovation projects replacing framed doors with frameless glass
• Custom enclosures spec’d by architects and glazing contractors

Más en esta serie: Bisagra pivote biselada-3830 · Bisagra pivote cuadrada súper-3828

Notas de instalación

1. Confirm the door is monolithic tempered glass within 8 mm (5/16″), 10 mm (3/8″).
2. Mount the pivot hinge to the wall (or floor-side pivot, per the drawing) into a solid, plumb substrate.
3. Drop the door onto the pivot spindle and set the vertical with the adjustment screws.
4. Swing the door through the full arc and set closing tension so the door settles at the seal line.
5. Tile over hollow drywall needs backing plates – the hinge carries the full door weight. Professional installation recommended.

Preguntas frecuentes

What glass thickness does the Z-3820 fit?

The Z-3820 is rated for 8 mm (5/16″), 10 mm (3/8″) monolithic tempered glass. Always use tempered (safety) glass – never annealed glass.

What is the Z-3820 made of?

The Z-3820’s hinge body is made of solid forged brass, with stainless steel return springs inside. Brass bodies take Zimmor’s full finish program, including PVD coatings for humid bathrooms.

Is the Z-3820 self-closing?

Yes. A spring inside the hinge starts closing the door from about 15° of opening, so the door returns to the seal line on its own.

How is the door adjusted after installation?

Hinges in this series include adjustment screws: close the door, check the vertical gaps, and correct the door position with the adjustment screws before final tightening.

Can this hinge be retrofitted to an existing enclosure?

Yes, if the drilled hole pattern on the existing door matches the hinge cup spacing. Measure before ordering – tempered panels cannot be re-drilled after the fact.