Петля поворотная квадратная-3820
Standard Duty Square Corner Pivot Shower Hinge (Z-3820) is a shower door hinge for frameless shower doors, made for 8 mm (5/16″), 10 mm (3/8″) tempered glass, built from solid forged brass.
| Использование монолитного закалённого стекла для толщин стекла | |||
| 1/2″ (12 мм) | 3/8″ (10 мм) | 5/16″ (8 мм) | 1/4″ (6 мм) |
| √ | √ | ||
Предназначен для стекла толщиной 5/16″(8мм) и 3/8″(10мм)
Цельная кованая конструкция из латуни
Двойные пружины возврата из нержавеющей стали с точной намоткой
Винты зажимов стиля Алана из нержавеющей стали
(В комплекте Allen-ключ) и крестообразные винты
Самозакрывающийся от 25 градусов
| Все покрытия доступны | ||||
| Максимальный | Стекло 5/16″(8мм) | Стекло 3/8″ (10 мм) | ||
| Ёмкость | Вес | Ширина двери | Вес | Ширина двери |
| Использование двух петель | 100 фунтов/45 кг | 31″/787 мм | 100 фунтов/45 кг | 31″/787 мм |
Для более широкого выбора, смотрите наш полное руководство по спецификации сантехнического оборудования для душевых и руководства по PVD-покрытию.
Standard Duty Square Corner Pivot Shower Hinge (Z-3820) is a standard duty frameless shower door hinge. It is engineered for 8 mm (5/16″), 10 mm (3/8″) monolithic tempered glass. The body is machined from solid forged brass, with stainless return springs and self-closing action from 15°. It is available in Zimmor’s full finish program (PVD included) to match the rest of the enclosure hardware. For the wider selection context, see Zimmor’s shower door hinge guide.
Ключевые особенности
- Совместимость со стеклом: Fits 8 mm (5/16″), 10 mm (3/8″) monolithic tempered glass
- Material: solid forged brass construction with precision-wound stainless return springs
- Self-closing: spring returns the door from 15° of opening
- Rated class: standard duty build for heavier leaves
- Finishes: full Zimmor finish program available, PVD included
Применение
- Frameless pivot shower doors in residential bathrooms
- Hotel and gym wet rooms where doors take daily, heavy use
- Wall-to-glass openings in walk-in showers
- Renovation projects replacing framed doors with frameless glass
- Custom enclosures spec’d by architects and glazing contractors
Больше в этой серии: Петля поворотная с фаской-3830 · Сверхпрочная угловая квадратная поворотная петля для душа-3828
Заметки по установке
- Confirm the door is monolithic tempered glass within 8 mm (5/16″), 10 mm (3/8″).
- Mount the pivot hinge to the wall (or floor-side pivot, per the drawing) into a solid, plumb substrate.
- Drop the door onto the pivot spindle and set the vertical with the adjustment screws.
- Swing the door through the full arc and set closing tension so the door settles at the seal line.
- Tile over hollow drywall needs backing plates – the hinge carries the full door weight. Professional installation recommended.
Часто задаваемые вопросы
Какая толщина стекла подходит для Z-3820?
The Z-3820 is rated for 8 mm (5/16″), 10 mm (3/8″) monolithic tempered glass. Always use tempered (safety) glass – never annealed glass.
Из чего изготовлен Z-3820?
The Z-3820’s hinge body is made of solid forged brass, with stainless steel return springs inside. Brass bodies take Zimmor’s full finish program, including PVD coatings for humid bathrooms.
Is the Z-3820 self-closing?
Yes. A spring inside the hinge starts closing the door from about 15° of opening, so the door returns to the seal line on its own.
How is the door adjusted after installation?
Hinges in this series include adjustment screws: close the door, check the vertical gaps, and correct the door position with the adjustment screws before final tightening.
Can this hinge be retrofitted to an existing enclosure?
Yes, if the drilled hole pattern on the existing door matches the hinge cup spacing. Measure before ordering – tempered panels cannot be re-drilled after the fact.
