Dobradiça retangular c/ tampa-8309F
Adjustable Rectangular Flat Shower Hinge With Cover (Z-8309F) is a shower door hinge for frameless shower doors, made for 6 mm (1/4″), 8 mm (5/16″), 10 mm (3/8″) tempered glass, built from solid forged brass.
| Use Vidro Temperado Monolítico Para Espessuras de Vidro | |||
| 1/2′′ (12 MM) | 3/8′′ (10 MM) | 5/16′′ (8 MM) | 1/4′′ (6 MM) |
| √ | √ | √ | |
Projetado para Vidro Temperado de Segurança de 1/4″(6mm) a 3/8″(10mm)
Construção Sólida de Latão Forjado
O ângulo da Dobradiça pode ser Ajustado
Placa traseira para montagem na parede em ambos os lados
Para orientação de seleção mais abrangente, veja nossos guia completo de especificação de ferragens para boxes e guia de revestimento PVD.
Adjustable Rectangular Flat Shower Hinge With Cover (Z-8309F) is a adjustable frameless shower door hinge. It is engineered for 6 mm (1/4″), 8 mm (5/16″), 10 mm (3/8″) monolithic tempered glass. The body is machined from solid forged brass. For the wider selection context, see Zimmor’s shower door hinge guide.
Key Features
- Glass compatibility: Fits 6 mm (1/4″), 8 mm (5/16″), 10 mm (3/8″) monolithic tempered glass
- Material: solid forged brass construction
- Adjustable: door alignment can be corrected after installation
- Covered design: cover plate conceals the fixings for a clean look
Applications
- Frameless pivot shower doors in residential bathrooms
- Hotel and gym wet rooms where doors take daily, heavy use
- Wall-to-glass openings in walk-in showers
- Renovation projects replacing framed doors with frameless glass
- Custom enclosures spec’d by architects and glazing contractors
More in this series: Dobradiça Reforçada Ajustável para box de Canto Quadrado Plano com Tampa-7909F · Dobradiça Reforçada Ajustável para box de Canto Quadrado Plano com Tampa-7920
Installation Notes
- Confirm the door and panel are monolithic (tempered) safety glass and within 6 mm (1/4″), 8 mm (5/16″), 10 mm (3/8″) range.
- Mark hole positions on a plumb, solid substrate, drill, and secure with appropriate wall anchors and the hinge mounting screws.
- Hang the door on the hinge and close it; use the adjustment screws to level the gaps before final tightening.
- Check swing and self-close action through the full arc; confirm the door does not contact the fixed panel.
- Wall substrate must carry the door weight – tile over drywall needs backing or through-bolts. Professional installation recommended.
Perguntas Frequentes
What glass thickness does the Z-8309F fit?
The Z-8309F is rated for 6 mm (1/4″), 8 mm (5/16″), 10 mm (3/8″) monolithic tempered glass. Always use tempered (safety) glass – never annealed glass.
What is the Z-8309F made of?
The Z-8309F’s hinge body is made of solid forged brass. Brass bodies take Zimmor’s full finish program, including PVD coatings for humid bathrooms.
How is the door adjusted after installation?
Hinges in this series include adjustment screws: close the door, check the vertical gaps, and correct the door position with the adjustment screws before final tightening.
Can this hinge be retrofitted to an existing enclosure?
Yes, if the drilled hole pattern on the existing door matches the hinge cup spacing. Measure before ordering – tempered panels cannot be re-drilled after the fact.
Do you support OEM/ODM and custom finishes?
Yes. Zimmor manufactures shower hardware in Foshan since 1999 with OEM/ODM service: custom dimensions, logos, and surface finishes including PVD are produced to project specification.
