Регулируемый прямоугольный плоский душевой петельный элемент-8340

Для закалённого безопасного стекла толщиной от 1/4″ (6 мм) до 3/8″ (10 мм)
Цельная кованая конструкция из латуни
Угол шарнира можно регулировать
Настенный монтаж, двусторонняя задняя планка

Для более широкого выбора, смотрите наш полное руководство по спецификации сантехнического оборудования для душевых и руководства по PVD-покрытию.

Adjustable Rectangular Flat Shower Hinge (Z-8340) is a adjustable frameless shower door hinge at a 90° panel angle. It is engineered for 6 mm (1/4″), 8 mm (5/16″), 10 mm (3/8″) monolithic tempered glass. The body is machined from solid forged brass. For the wider selection context, see Zimmor’s shower door hinge guide.

Ключевые особенности

• Совместимость со стеклом: Fits 6 mm (1/4″), 8 mm (5/16″), 10 mm (3/8″) monolithic tempered glass
• Material: solid forged brass construction
• Adjustable: door alignment can be corrected after installation
• Геометрия: built for 90° panel angles

Применение

• Frameless pivot shower doors in residential bathrooms
• Hotel and gym wet rooms where doors take daily, heavy use
• Wall-to-glass openings in walk-in showers
• Renovation projects replacing framed doors with frameless glass
• Custom enclosures spec’d by architects and glazing contractors

Больше в этой серии: Регулируемый прямоугольный плоский душевой петельный элемент-8330 · Регулируемый прямоугольный плоский душевой петельный элемент-8320

Заметки по установке

1. Confirm the door and panel are monolithic (tempered) safety glass and within 6 mm (1/4″), 8 mm (5/16″), 10 mm (3/8″) range.
2. Mark hole positions on a plumb, solid substrate, drill, and secure with appropriate wall anchors and the hinge mounting screws.
3. Hang the door on the hinge and close it; use the adjustment screws to level the gaps before final tightening.
4. Check swing and self-close action through the full arc; confirm the door does not contact the fixed panel.
5. Wall substrate must carry the door weight – tile over drywall needs backing or through-bolts. Professional installation recommended.

Часто задаваемые вопросы

What glass thickness does the Z-8340 fit?

The Z-8340 is rated for 6 mm (1/4″), 8 mm (5/16″), 10 mm (3/8″) monolithic tempered glass. Always use tempered (safety) glass – never annealed glass.

What is the Z-8340 made of?

The Z-8340’s hinge body is made of solid forged brass. Brass bodies take Zimmor’s full finish program, including PVD coatings for humid bathrooms.

Can the door position be corrected once fitted?

Yes – loosen the adjustment screws, level the door against the fixed panel, and re-tighten. Do the check with the door closed so the gap line reads true.

Does the finish need maintenance in a wet bathroom?

Wipe the fittings down after heavy use and avoid abrasive cleaners. PVD finishes hold up best against constant humidity and limescale.

Where do Zimmor products ship from?

Production is based in Foshan, Guangdong, China, and Zimmor serves customers worldwide – freight terms and consolidation are confirmed on the quotation.