Zimmor Hardware

Towel Bar and Handle Combo-5346

Towel Bar and Handle Combo (Z-5346) is a shower door handle & knob series for frameless glass shower doors, made for 6 mm (1/4″), 8 mm (5/16″), 10 mm (3/8″), 12 mm (1/2″) tempered glass, built from brass.

✓ IN STOCK
Get A Quote

Send Inquiry

Please fill out the form below, we will quote you soon.

SHARE
Use Monolithic Tempered Glass For Glass Thicknesses
1/2′′ (12MM) 3/8′′ (10MM) 5/16′′ (8MM) 1/4′′ (6MM)
√ √ √ √

 

Designed for 1/4″(6mm) to 1/2″(12mm) Glass

Brass Construction
3/4″(19mm) Diameter Brass Tubing

For broader selection guidance, see our complete shower hardware specification guide and PVD coating guide.

Towel Bar and Handle Combo (Z-5346) is a towel bar and handle combo for frameless glass shower doors. The grip tube is 19 mm (3/4″) diameter brass tubing, sized for a comfortable two-finger pull. It mounts on 6 mm (1/4″), 8 mm (5/16″), 10 mm (3/8″), 12 mm (1/2″) tempered glass with through-glass fixings. Wholesale buyers commonly source this model as a shower door towel bar. For the wider selection context, see Zimmor’s shower handle & knob guide.

Key Features

  • Glass compatibility: Mounts on 6 mm (1/4″), 8 mm (5/16″), 10 mm (3/8″), 12 mm (1/2″) monolithic tempered glass
  • Material: brass construction
  • Tubing: 19 mm (3/4″) diameter brass tube profile

Applications

  • Pull handles for pivot and hinged frameless shower doors
  • Grips for sliding shower door leaves
  • Towel bars on shower doors – double duty in small bathrooms
  • Hotel and apartment bathroom programs specified in bulk
  • Office glass partition doors
  • Wholesale and OEM sourcing programs – a recurring shower door hardware line for distributors

More in this series: Towel Bar and Handle Combo-5343 · Towel Bar and Handle Combo-5347

Installation Notes

  1. Drill the through-holes in the glass panel to the tube diameter spec before tempering – do not drill tempered glass.
  2. Insert the mounting bolts through the glass and thread them into both tube ends.
  3. Tighten evenly until the washers seat against the glass.
  4. Hang a wet towel at mid-span and check the tube does not rotate or slide.
  5. Re-torque the set screws after the first week of use if needed.

Frequently Asked Questions

What glass thickness does the Z-5346 mount on?

It mounts on 6 mm (1/4″), 8 mm (5/16″), 10 mm (3/8″), 12 mm (1/2″) tempered glass. The through-glass holes are drilled before tempering, so confirm thickness and hole pattern with your fabricator early.

What is the Z-5346 made of?

The Z-5346 is built from brass. Solid metal construction matters on glass hardware – thin stamped parts creep loose under door loads.

Can this handle be used on a sliding shower door?

Yes – the same tube-and-bolt construction is used on sliding leaves as a side grip. For main pull duty on pivot doors, match it with the back-to-back version.

What do the washers do on this handle?

The washers sit between the tube and the glass, spreading the bolt load and letting the tube turn slightly without grinding the tempered surface.

Do you supply the towel bar handle combo for wholesale and OEM programs?

Yes – this model is produced in Zimmor’s Foshan factory for wholesale and OEM sourcing: custom finishes, packaging and volume pricing are confirmed per order.