OEM and ODM shower hardware is a manufacturing service before it is a product list. A buyer arrives with a drawing, a target finish and a market; the factory has to turn that into a repeatable part with a stable cost, a documented inspection and a packaging file that can go straight to a retailer or distributor.
Zimmor has made shower hinges, clamps, handles, seals and stabilizers since 1999 and exports to more than 136 countries. This page sets out what can be customized, how the process runs, where quality is checked, and what a buyer should prepare before asking for a quotation. It is written for importers, distributors, fabricators and private-label brands, not for a one-off retail order.
For stock assortment, mixed containers and private-label programmes rather than a new part, start with the wholesale shower hardware page.

OEM and ODM: what each means here
OEM means the buyer owns the design and the brand; Zimmor manufactures to the drawing, specification and packaging file. ODM means the buyer brings a market requirement or a reference sample, and Zimmor proposes the geometry, material and finish before the buyer brands the result. Both routes can use the same tooling, inspection and export process; the difference is who owns the development work.
What can be customized
| Area | Options | What the buyer supplies |
|---|---|---|
| Material | Solid brass, 304 or 316 stainless steel, zinc alloy with plating | Target market, budget band, corrosion exposure |
| Finish | Chrome, brushed nickel, matte black, gold, PVD, powder coat | Reference sample or Pantone/RAL target; salt-spray hours |
| Dimensions | 6-12 mm glass, custom centre-to-centre, bar length, bracket angle | Door drawing, glass thickness, opening size |
| Branding | Laser logo, etched logo, colour box, insert card, barcode | Logo file, packaging dieline, market language |
| Assembly | Left or right handing, back-to-back sets, self-closing spring force | Opening direction and use frequency |
| Compliance | Test reports, material certificates, RoHS/REACH declarations | Destination market and required standard |
From drawing to shipment: six stages
| Stage | Output | Typical time |
|---|---|---|
| 1. RFQ review | Drawing check, missing-dimension list, material and finish questions | 24-48 hours |
| 2. Quotation and DFM | Unit cost, MOQ, tooling, lead time, packing proposal | 2-3 working days |
| 3. Sample | Production sample in the agreed finish, with inspection sheet | 7-12 days after approval |
| 4. Sample approval | Signed dimension, finish and function checklist; golden sample retained | 3-5 days |
| 5. Mass production | Parts, assemblies and packaging against the approved sample | 25-35 days after deposit and approval |
| 6. QC and shipping | AQL inspection, test reports, packing list, export documents | 7-10 days before vessel cut-off |
These windows are typical for a repeat or simple custom part. New tooling, multi-component assemblies or a new finish line add development time; the quotation states the actual schedule.
MOQ, samples and tooling
MOQ is set per model and per finish, not per factory. A stocked chrome hinge can run in a smaller batch than a new matte-black PVD body, because the finish line has a minimum load. Mixed containers are possible when the total quantity supports the line; the quotation will show which lines can be combined and which need their own minimum.
Samples are quoted as a separate line and are normally credited against the first production order. Tooling ownership, if new dies or fixtures are required, is stated in the quotation and can be transferred to the buyer under the NDA. Do not assume a sample price is the production price: the sample may be machined or hand-polished outside the normal line.
Quality gates that protect the brand
- Incoming material: brass and stainless steel grades checked against the material certificate before machining.
- Machining: hole position, centre-to-centre and thread depth checked against the drawing on the bench, not after plating.
- Surface: polishing and brushing inspected under oblique light for scratches, orange peel and edge burn.
- Plating: coating thickness and adhesion checked on production parts; salt-spray hours run to the agreed standard, typically 24, 48 or 72 hours.
- Function: spring force, closing position and cycle endurance tested on the assembled hinge, with the result recorded against the batch.
- Packing: box, label, barcode and master carton checked against the approved packaging file before the container is loaded.
NDA, exclusivity and packaging
Buyers who invest in a new body or a private finish usually need three protections: an NDA before drawings are shared, a written tooling ownership clause, and a market-exclusivity term if the volume supports it. Zimmor can sign the buyer’s NDA or provide a mutual agreement, and can hold a private label out of the public catalogue.
Packaging is part of the brand. Supply the dieline, logo file, barcode and any required language; the factory returns a proof before printing. For private label, keep the installation sheet, warranty card and spare-parts list consistent across the range, not just on the hero SKU.
Export and logistics
Export documents, HS codes, packing lists and certificates are prepared per destination. Consolidation with other Zimmor lines is possible when the order ships from the same factory; spare parts and accessories can be packed into the same carton to reduce landed cost. Discuss the Incoterm and inspection point before production, not after the container is booked.
FAQ
What is the minimum order for private label shower hardware?
It depends on the model and finish. Stocked chrome or brushed nickel lines can start lower than a new PVD colour; mixed lines can be combined when the total quantity supports the production run. The quotation states the exact MOQ for each SKU.
Can you match a competitor’s finish?
Yes, against a physical sample or a colour target. The factory will return a coated sample for approval before mass production, and will state the salt-spray hours the finish is expected to pass.
Do you provide test reports and certificates?
Material certificates, coating thickness, salt-spray and function test records are available for the approved specification. Market-specific declarations such as RoHS or REACH are prepared when the destination requires them.
Can we visit the factory before placing an order?
Yes. Schedule a factory visit or a video audit with the sales team; the line, inspection bench and test equipment can be shown against the product you intend to order.
Start with a drawing. Send the glass thickness, opening size, target finish and estimated annual quantity to Zimmor’s OEM team for a DFM review and quotation. Product ranges are listed under product solutions and the product archive.