Wholesale Shower Hardware: Factory Pricing, MOQ and Lead Times

Wholesale shower hardware is not a single product; it is an assortment problem. A distributor needs hinges that fit several glass thicknesses, clamps that match the same finish, handles that survive daily use, and seals that complete the enclosure without leaking. Buying each family from a different trader adds freight, quality risk and weeks of coordination. This page explains how Zimmor structures a wholesale programme for importers, fabricators, contractors and hotel projects, and what to prepare before asking for a quotation.

Wholesale shower hardware showroom with boxed hinges, clamps and handles

What wholesale buyers usually source together

Most containers are mixed. The five families below are designed to work as one system, so a buyer can build a complete frameless or semi-frameless enclosure from one supplier instead of matching parts across catalogues.

Family What it covers Wholesale page
Shower hinges 90 degree, 135 degree, adjustable, heavy duty and pivot hinges for 8-12 mm glass Shower hinge range
Glass clamps Wall-to-glass, glass-to-glass, corner and U-clamps in square, round and bevel shapes Shower clamp range
Handles and knobs Towel bar handles, pull handles, back-to-back sets and knobs Handle and knob range
Seals and headers PVC and PC seals, magnetic strips, aluminium headers and profiles Seal and header range
Stabilizers Support bars, wall brackets, T-junctions and corner brackets Stabilizer range

Four wholesale routes, one factory

Stock assortment. A distributor selects fast-moving models from the existing range, mixes finishes and glass thicknesses in one order, and receives retail-ready boxes. This is the shortest route because the tooling already exists.

Trial order. A new importer tests a narrow set of models in one or two finishes before committing to a container. The trial is used to check fit, finish, packaging and sell-through, not to negotiate the lowest unit price.

Private label. The buyer supplies a brand, dieline and barcode; Zimmor prints the box, inserts and warning labels, and keeps the model numbers stable across repeat orders.

OEM and ODM. The buyer needs a new geometry, a different finish, a custom spring rate or a branded assembly. This route starts with a drawing or sample and moves through tooling, first article, inspection and pilot production. See the OEM and ODM shower hardware page for the full process.

MOQ, price breaks and mixed containers

MOQ is confirmed per model and per finish, not per container. A single model in one finish has a higher minimum than a mixed order that combines several fast-moving models. Price breaks usually follow the order structure: sample quantity, trial quantity, full container, and repeat programme. Because brass, zinc alloy and stainless steel costs move, Zimmor quotes against the current material index and the agreed finish rather than publishing a fixed list price.

A mixed container can combine hinges, clamps, handles, seals and stabilizers as long as the carton dimensions and total weight are balanced. The practical limit is not the number of SKUs; it is the number of cartons that can be stacked without crushing the retail box. Send the target SKU list with estimated units per model and Zimmor will return a container plan before the deposit.

Lead time, shipping and documents

Lead time is set after sample approval, deposit and packaging proof. Repeat orders are shorter because tooling, print plates and inspection plans already exist. Shipments normally move by sea from Foshan or Shenzhen; air and courier are used for samples and urgent trial orders. Commercial invoice, packing list, bill of lading, certificate of origin and the relevant test reports are prepared against the order. Incoterms, destination charges and insurance are confirmed in the quotation so the landed cost is visible before production starts.

Quality control that a wholesaler can audit

Each lot is checked against the approved sample and the drawing: glass thickness range, hole pitch, spring torque, finish colour, salt spray hours, seal hardness and carton drop. Inspectors record the results by model and carton, and photographs are kept with the inspection file. A buyer can request a pre-shipment inspection, a third-party inspection or a sealed retained sample. The point is not a logo on a certificate; it is a record that can be compared across repeat orders.

What to prepare before asking for a quotation

  1. Target market and estimated annual volume by family.
  2. Glass thickness and enclosure type: frameless, semi-frameless or sliding.
  3. Finish and colour reference, including a physical sample if colour matching matters.
  4. Packaging route: neutral box, private label or retail-ready display carton.
  5. Destination port, preferred Incoterm and required documents.
  6. Any certification or test report the market requires.

With those six inputs, a quotation can be specific instead of a range. The wholesale shower hardware RFQ checklist walks through the same list in article form, and the shower door hinge calculator helps size hinge count and glass load before the first call.

Frequently asked questions

Can I mix several product families in one order?

Yes. Hinges, clamps, handles, seals and stabilizers can be combined in one container. The container plan balances carton size, weight and stacking strength rather than forcing a single-model minimum.

Do you supply neutral packaging?

Yes. Neutral export cartons, Zimmor-branded boxes and full private-label packaging are all available. A dieline and barcode are required for private label.

Can I order a sample before a container?

Yes. Samples are quoted separately and can be couriered. Sample cost and freight are confirmed before dispatch.

How do you keep finish colour consistent across repeat orders?

The approved finish sample is retained, and each lot is compared against it under the same light source. Salt spray and colour checks are recorded in the inspection file.

Do you support hotel and contract projects?

Yes. Project orders can be phased by construction stage, with a retained sample and a fixed model list so later phases match earlier deliveries.

Next step

Send the target families, glass thickness, finish and destination port through the contact page. If the requirement is a new part rather than a catalogue model, start with the OEM and ODM process. If the immediate need is a technical guide, read the frameless shower hardware specification guide before shortlisting models.