Zimmor Hardware

Flat Square Corner Adjustable Shower Hinge With Cover-7840

Flat Square Corner Adjustable Shower Hinge With Cover (7840) is a shower door hinge for frameless shower doors, made for 8 mm (5/16″), 10 mm (3/8″), 12 mm (1/2″) tempered glass.

✓ IN STOCK
Get A Quote

Send Inquiry

Please fill out the form below, we will quote you soon.

SHARE
Use Monolithic Tempered Glass For Glass Thicknesses
1/2′′ (12MM) 3/8′′ (10MM) 5/16′′ (8MM) 1/4′′ (6MM)
√ √ √

 

Flat Surface Patent Design
Adjustable to any Angle Up to 90 Degrees Without Having to Take Door Down.
3 Years Warranty
Self-closing from 25 Degrees
Designed for 5/16″(8mm) to 1/2″(12mm) Glass

 

All Finishes Available
Maximum 5/16″(8mm)  3/8″(10mm) Glass 1/2″(12mm) Glass
Capacities Weight Door Width Weight Door Width
Using Two Hinges 80 lbs/36kg 28″/711mm 80 lbs/36kg 28″/711mm
Using Three Hinges 120 lbs/54kg 32″/813mm 120 lbs/54kg 32″/813mm

For broader selection guidance, see our complete shower hardware specification guide and PVD coating guide.

Flat Square Corner Adjustable Shower Hinge With Cover (7840) is a adjustable frameless shower door hinge at a 90° panel angle. It is engineered for 8 mm (5/16″), 10 mm (3/8″), 12 mm (1/2″) monolithic tempered glass. A built-in spring returns the door to closed from 15° of swing. It is available in Zimmor’s full finish program (PVD included) to match the rest of the enclosure hardware. Wholesale buyers commonly source this model as a square corner glass hinge. For the wider selection context, see Zimmor’s shower door hinge guide.

Key Features

  • Glass compatibility: Fits 8 mm (5/16″), 10 mm (3/8″), 12 mm (1/2″) monolithic tempered glass
  • Self-closing: spring returns the door from 15° of opening
  • Adjustable: door alignment can be corrected after installation
  • Geometry: built for 90° panel angles with a square-corner profile
  • Covered design: cover plate conceals the fixings for a clean look
  • Finishes: full Zimmor finish program available, PVD included

Applications

  • Frameless pivot shower doors in residential bathrooms
  • Hotel and gym wet rooms where doors take daily, heavy use
  • Wall-to-glass openings in walk-in showers
  • Renovation projects replacing framed doors with frameless glass
  • Custom enclosures spec’d by architects and glazing contractors
  • Wholesale and OEM sourcing programs – a recurring self closing shower hinge line for distributors

More in this series: Flat Square Corner Adjustable Shower Hinge With Cover-7830 · Flat Square Corner Adjustable Shower Hinge With Cover-7820

Installation Notes

  1. Confirm the door and panel are monolithic (tempered) safety glass and within 8 mm (5/16″), 10 mm (3/8″), 12 mm (1/2″) range.
  2. Mark hole positions on a plumb, solid substrate, drill, and secure with appropriate wall anchors and the hinge mounting screws.
  3. Hang the door on the hinge and close it; use the adjustment screws to level the gaps before final tightening.
  4. Check swing and self-close action through the full arc; confirm the door does not contact the fixed panel.
  5. Wall substrate must carry the door weight – tile over drywall needs backing or through-bolts. Professional installation recommended.

Frequently Asked Questions

What glass thickness does the 7840 fit?

The 7840 is rated for 8 mm (5/16″), 10 mm (3/8″), 12 mm (1/2″) monolithic tempered glass. Always use tempered (safety) glass – never annealed glass.

Is the 7840 self-closing?

Yes. A spring inside the hinge starts closing the door from about 15° of opening, so the door returns to the seal line on its own.

How is the door adjusted after installation?

Hinges in this series include adjustment screws: close the door, check the vertical gaps, and correct the door position with the adjustment screws before final tightening.

Can this hinge be retrofitted to an existing enclosure?

Yes, if the drilled hole pattern on the existing door matches the hinge cup spacing. Measure before ordering – tempered panels cannot be re-drilled after the fact.

Do you supply the self closing shower hinge for wholesale and OEM programs?

Yes – this model is produced in Zimmor’s Foshan factory for wholesale and OEM sourcing: custom finishes, packaging and volume pricing are confirmed per order.