Round Tubing Handle And Towel Bar Combo Without Washers-5341
Round Tubing Handle And Towel Bar Combo Without Washers (Z-5341) is a shower door handle & knob series for frameless glass shower doors, made for 6 mm (1/4″), 8 mm (5/16″), 10 mm (3/8″), 12 mm (1/2″) tempered glass, built from brass.
| Use Monolithic Tempered Glass For Glass Thicknesses | |||
| 1/2′′ （12MM） | 3/8′′ （10MM） | 5/16′′ （8MM） | 1/4′′ （6MM） |
| √ | √ | √ | √ |
Designed for 1/4″(6mm) to 1/2″(12mm) Glass
Brass Construction
3/4″(19mm) Diameter Brass Tubing
For broader selection guidance, see our complete shower hardware specification guide and PVD coating guide.
Round Tubing Handle And Towel Bar Combo Without Washers (Z-5341) is a towel bar and handle combo for frameless glass shower doors. The grip tube is 19 mm (3/4″) diameter brass tubing, sized for a comfortable two-finger pull. It mounts on 6 mm (1/4″), 8 mm (5/16″), 10 mm (3/8″), 12 mm (1/2″) tempered glass with through-glass fixings. Wholesale buyers commonly source this model as a shower handle towel bar combo. For the wider selection context, see Zimmor’s shower handle & knob guide.
Key Features
- Glass compatibility: Mounts on 6 mm (1/4″), 8 mm (5/16″), 10 mm (3/8″), 12 mm (1/2″) monolithic tempered glass
- Material: brass construction
- Tubing: 19 mm (3/4″) diameter brass tube profile
- Supplied without washers (order washers separately if the mating set needs them)
Applications
- Pull handles for pivot and hinged frameless shower doors
- Grips for sliding shower door leaves
- Towel bars on shower doors – double duty in small bathrooms
- Hotel and apartment bathroom programs specified in bulk
- Office glass partition doors
- Wholesale and OEM sourcing programs – a recurring brass shower handle line for distributors
More in this series: Round Tubing Towel Bar Without Washers-5321-18 · Round Tubing Handle And Towel Bar Combo With Washers-5342
Installation Notes
- Drill the through-holes in the glass panel to the tube diameter spec before tempering – do not drill tempered glass.
- Insert the mounting bolts through the glass and thread them into both tube ends.
- Tighten evenly until the washers seat against the glass.
- Hang a wet towel at mid-span and check the tube does not rotate or slide.
- Re-torque the set screws after the first week of use if needed.
Frequently Asked Questions
What glass thickness does the Z-5341 mount on?
It mounts on 6 mm (1/4″), 8 mm (5/16″), 10 mm (3/8″), 12 mm (1/2″) tempered glass. The through-glass holes are drilled before tempering, so confirm thickness and hole pattern with your fabricator early.
What is the Z-5341 made of?
The Z-5341 is built from brass. Solid metal construction matters on glass hardware – thin stamped parts creep loose under door loads.
Can this handle be used on a sliding shower door?
Yes – the same tube-and-bolt construction is used on sliding leaves as a side grip. For main pull duty on pivot doors, match it with the back-to-back version.
Does the handle need maintenance?
Retighten the set screws after the first week of use and wipe dry after showers. Plated brass tube holds its finish well; avoid abrasive creams.
Do you supply the glass shower door handle for wholesale and OEM programs?
Yes – this model is produced in Zimmor’s Foshan factory for wholesale and OEM sourcing: custom finishes, packaging and volume pricing are confirmed per order.
