The Zimmor 9000 Series includes three heavy-duty beveled-edge shower hinge models: Z-9011 for 90° wall-to-glass mounting with a full back plate, Z-9013 for 90° wall-to-glass mounting with an offset back plate, and Z-9020 for 180° glass-to-glass mounting. Each current product page lists 10 mm and 12 mm monolithic tempered glass; confirm the model drawing and project configuration before ordering.
| Model | Published mounting arrangement | Product page |
|---|---|---|
| Z-9011 | 90° wall-to-glass, full back plate | View Z-9011 product specifications |
| Z-9013 | 90° wall-to-glass, offset back plate | View Z-9013 product specifications |
| Z-9020 | 180° glass-to-glass | View Z-9020 product specifications |
The three linked product pages currently publish the same glass range and hinge-set capacity table: for a door width up to 914 mm, the listed configuration is 50 kg / 110 lb with two hinges or 63 kg / 140 lb with three hinges. Treat these as model-page specifications, not a generic rule for other hinges or installations. Confirm the current product drawing, fixing conditions and full enclosure design.
Frameless shower enclosures require hardware that accommodates different glass configurations while maintaining consistent performance and appearance. For glass fabricators, shower enclosure manufacturers and commercial project contractors, selecting the appropriate hinge configuration is an important part of coordinating door design, glass preparation and hardware specifications.
At Zimmor Hardware, our 9000 Series heavy-duty beveled-edge shower hinges include mounting options for wall-supported and fixed-glass-supported doors. Among these options, the Z-9011, Z-9013 and Z-9020 are designed for three distinct hinge arrangements commonly used in frameless shower enclosures.
Each model combines the core specifications of the 9000 Series with a different mounting configuration, helping customers identify suitable hardware for residential, hospitality and commercial glass installations.
Three Hinge Configurations for Different Frameless Shower Designs
The Z-9011, Z-9013 and Z-9020 share a common product series but are intended for different mounting positions. Understanding these differences allows buyers to match hardware configurations with their enclosure designs before finalizing product specifications.
Z-9011: 90° Wall-to-Glass Hinge with Full Back Plate
The Z-9011 is a heavy-duty beveled-edge hinge designed for 90-degree wall-to-glass installation. Its full wall-side back plate provides a mounting arrangement for shower doors positioned directly against a supporting wall.
This configuration is relevant to frameless shower enclosures where the hinge side of the glass door is wall-mounted and the available fixing area accommodates the full back plate.
The Z-9011 supports both 10 mm and 12 mm monolithic tempered glass and incorporates the heavy-duty construction and self-closing mechanism specified for the series.
For glass fabricators and contractors, the model offers a wall-mounted option within Zimmor’s heavy-duty hinge range. Final selection should be based on the enclosure dimensions, fixing conditions and manufacturer-provided glass preparation drawings.
Z-9013: 90° Wall-to-Glass Hinge with Offset Back Plate
The Z-9013 also supports a 90-degree wall-to-glass installation but features an offset wall-side back plate instead of the full back plate used on the Z-9011.
This distinction provides an alternative hinge configuration for enclosure designs requiring a different wall-side plate position. Although both models belong to the same product series, their mounting geometry should be evaluated separately.
For projects involving predefined fixing positions, replacement installations or specific architectural layouts, the Z-9013 provides an additional configuration to consider.
As with other precision glass hardware, hinge selection and glass processing should follow the corresponding technical drawings to ensure compatibility with the intended installation.
Z-9020: 180° Glass-to-Glass Hinge
The Z-9020 is designed for a different mounting arrangement. Rather than attaching the door directly to a wall, this 180-degree glass-to-glass hinge connects a swinging shower door to an adjacent fixed glass panel.
This configuration is commonly considered for inline frameless shower enclosures, where the door and supporting fixed panel are positioned in the same plane.
The Z-9020 allows project designers and glass fabricators to specify a glass-to-glass mounting arrangement within the same heavy-duty beveled-edge hinge family.
Because the door is mounted to a fixed glass panel, the supporting glass assembly, hinge positioning and overall enclosure structure must be evaluated as part of the complete installation.
Heavy-Duty Construction and Consistent Technical Specifications
Across the three configurations, the 9000 Series is designed for 10 mm (3/8 in) and 12 mm (1/2 in) monolithic tempered glass.
The published technical specifications identify solid forged brass construction, dual precision-wound stainless steel return springs and self-closing action from 15 degrees.
According to Zimmor’s product specification tables, the maximum capacities are:
| Hinge Configuration | Maximum Door Weight | Maximum Door Width |
|---|---|---|
| Two Hinges | 50 kg (110 lb) | 914 mm (36 in) |
| Three Hinges | 63 kg (140 lb) | 914 mm (36 in) |
These figures refer to the capacity of a hinge set rather than an individual hinge. Installation suitability also depends on the glass door dimensions, mounting structure, fixing conditions and complete enclosure design.
In addition to the published brass construction specifications, current product information includes alternative material configurations and a range of surface finish options. Buyers can confirm available materials and finishes when requesting specifications or quotations.
Hardware Coordination for Residential and Commercial Projects
In larger shower enclosure projects, hardware selection extends beyond a single hinge model.
Hotels, residential developments and other multi-unit installations may require several enclosure configurations within the same project. One bathroom design may use a wall-mounted shower door, while another may incorporate a fixed glass panel supporting the swinging door.
Access to different hinge configurations within a related product range can help project buyers coordinate product specifications and hardware procurement.
Surface finish consistency is another important consideration, particularly when hinges, handles, glass clamps and stabilizer bars are specified together.
Zimmor Hardware supplies a range of frameless shower hardware products that can be considered as part of a coordinated enclosure hardware package. Buyers can discuss compatible components, material configurations and finish requirements during the specification process.
Manufacturing and OEM/ODM Support from Zimmor Hardware
Founded in Foshan, Guangdong Province, in 1999, Zimmor Hardware specializes in the manufacture of shower door hardware and architectural glass fittings for international markets.
Our manufacturing capabilities include CNC machining, product development, surface finishing, quality inspection and OEM/ODM production.
In addition to standard hardware models, we support customers with customized dimensions, product designs, surface finishes, branding and packaging requirements according to project and order specifications.
For shower enclosure manufacturers, hardware distributors and glass hardware brands, these capabilities provide access to both established product models and customization services through a single manufacturing partner.
Learn more about Zimmor Hardware and our manufacturing capabilities.
Explore the 9000 Series and Discuss Your Project Requirements
The Z-9011, Z-9013 and Z-9020 demonstrate the different mounting arrangements available within Zimmor Hardware’s 9000 Series heavy-duty shower hinge range.
Whether a project requires full-back-plate wall mounting, offset-back-plate installation or inline glass-to-glass connections, selecting the correct hinge geometry is essential to planning a compatible frameless shower enclosure.
For product specifications, bulk purchasing or OEM/ODM inquiries, customers can contact Zimmor Hardware with their enclosure drawings, glass thickness, door dimensions, preferred finishes and estimated order quantities.
Our team can assist with product information, configuration comparisons and quotation requests based on the details provided.
Explore our shower door hinge collection or contact Zimmor Hardware to discuss your project requirements.
Frequently Asked Questions
How do the Z-9011, Z-9013 and Z-9020 differ?
Z-9011 is a 90° wall-to-glass hinge with a full back plate, Z-9013 is a 90° wall-to-glass hinge with an offset back plate, and Z-9020 is a 180° glass-to-glass hinge. Check the linked model drawing for the actual mounting details.
What glass sizes do the 9000 Series product pages list?
The current product pages list 10 mm and 12 mm monolithic tempered glass. Verify the exact model, drawing and glass preparation for your project before ordering.
What capacity is published for a 9000 Series hinge set?
The product pages list 50 kg / 110 lb with two hinges and 63 kg / 140 lb with three hinges, for a door width up to 914 mm. Confirm that the exact product page and installation conditions cover your project.
Are the three hinge models interchangeable?
No. They use different back-plate or panel-mounting arrangements. Match the model to the approved glass and enclosure drawings rather than substituting by appearance.